ORIGINAL FRB-5-1 WALBRO FUEL PUMP

GENUINE WALBRO FRB-5 FUEL PUMP – INDUSTRIAL

The Walbro FRB5-1 Industrial Fuel Pump works in a broad range of applications. It has a cleanable and replaceable internal filter, so strictly speaking no pre-filter is required. (Using an in-tank sock filter is still a good idea as it will generally wash itself of debris as the tank is refilled.) It operates only when fuel flow is required, so it cycles on and off depending on demand. It has incredible durability, with an expected lifespan of over 18,000 hours, and weighs less than 2 pounds. The FRB5-1 replaces the Walbro 6150, 6065 fuel pump in various applications.

ALL WALBRO MARINE AND INDUSTRIAL FUEL PUMPS FEATURE:

Low Current Draw
Reverse-Polarity Protected up to 60 minutes
Self-Priming (Dry Lift) of more than 24″ (120 cm)
Dry Run to Four Hours
Compatible With All Commercially-Available Pump-Grade Gasoline, Gasohol, Diesel, or Bio-Diesel
Operating Temperature from -40° to 155° Farenheit (-40° to 70° Celcius)
Protection from Transient Voltages to 100 vdc
US Coast Guard Approved (USCG 16623-1 and USCG 16623-2)
European CE Standard Approved (EN 61000-6-2 and EN 63-2100)

ADDITIONALLY, ALL WALBRO FRB-SERIES PUMPS FEATURE:

Continuous Duty Life Over 18,000 Hours (Diesel Fuel)
Weight of 0.83 Kg (1.83 lbs)
Pump Cycles Only On Fuel Demand
Replaceable Filter

PERFORMANCE

Voltage: 12 Volt (9.0 min – 16.0 vdc max)
Minimum Flow Rate: 170 liters per hour (45 gph)
Deadhead Pressure: 56 to 76 kPa (8.0 to 11.0 psi)
Maximum Current Draw: 2.3 amps
Life: >18,000 hours
Dry Lift: 48 inches (120 with optional outlet check valve)
Compatible Fuels: No-lead regular gasoline, premium gasoline, gasoline-alcohol blends, diesel and biodiesel fuels (20% and 100%), and E85
Corrosion Resistance: 96 hour salt spray test (ASTM B-117)
Operating Temperature Range: -40ºF to 155ºF (-40ºC to 68.3ºC)

⇓

Are you interested in this product? Do you need more information?

Please contact us NOW!!!